SOLAR   CHARGE CONTROLLER - SML series
Our new SML controller is a state-of-the art device which was developed in accordance with the latest available technical standards. It come s with a number of outstanding features,  such as:

*   Clear, readable display of the state of charge
*   Acoustic signal when the state of charge changes
*   Low voltage disconnect regulated by state of charge or voltage
*   16 mm2 connector clamps
*   Complete electronic protection

Code                               : SRCTR-SML

Max. load current            : 5A, 8A, 10A, 15A, 20A
System Voltage               : 12V/ 24V
Self Power Consumption : < 4mA

Dimensions(W x H X D)    : 80*100*32mm
Colour                              : Grey / White
Type of protection            : IP22
Function:
1.Battery State-of-Charge display with 3 LEDs.
2.Acoustic load disconnect pre-warning.
3.PWM-regulation (series type).
4.Boost, Equal ize and Float charging, also for VRLA.
5.Automatic 12/24 Volt detection.
6.Integrated temperature compensation.
7.Large terminals (up to 16mm2 wire size).
8.SOC and voltage control led LVD.
9.Fully electronical ly protected.

Features

*   Clear, readable display of
     the state of charge

*   Acoustic signal when the
     state of charge changes

*   Low voltage disconnect
     regulated by state of
     charge or voltage

*   16 mm2 connector clamps

*   Complete electronic
     protection
Description of Functions
The charge controller protects the battery from being overcharged by the solar array and from being deep discharged by the loads. The charging characteristics include several stages which include automatic adaptation to the ambient temperature. It can automatically adjusts the system voltage  to 12V or 24V. and it has a number of safety with display functions.

The SML series is a sophisticated solar charge controller family for low cost applications. The electronic circuit is equipped with a microcontroller that provides high-efficiency charging technology together with a number of outstanding status display, warning and safety functions.

The temperature-compensated three-stage PWM charging method (boost -equalization float ) is now adjustable to sealed and vented lead-acid batteries. The new version al so allows an either SOC or voltage controlled low voltage disconnect function. The battery status is clearly indicated by three LEDs.

As the first controller on the market in this price range it comes with an acoustic low voltage load disconnect pre-warning feature.
JOB SOLAR ENERGY SDN BHD


PRODUCTS  Range :
Products :
SOLAR POWER SYSTEM

LED LIGHTING

CRYSTAL LED LIGHT BOX

GREEN  LIGHTING
LED  LIGHTS
CRYSTAL LED LIGHTS BOX
FLEXIBLE LED LIGHT BOX
RENEWABLE  ENERGY
SOLAR POWER SYSTEM
Solar Charge Controller

JOB SOLAR ENERGY  @ COPYRIGHT 2011

Model Max. module current Max. load current
SML05 5A 5A
SML08 8A 8A
SML10 10A 10A
SML15 15A 15A
SML20 20A 20A
SML25 25A 25A
Type of Model
Nominal voltageAutomatic recognition 12V /24V
Boost voltage 14.5 / 29.0V (25C), 2 h
Equalization voltage 14.8 / 29.6V (25C), 2 h
Float voltage 13.7 / 27.4 V (25C), 2 h
Low Voltage  Disconnect Function 11.4-11.9v / 22.8-23.8v controlled by state of charge  11.0 /22.0v controlled by voltage
Load reconnect voltage 12.8 /25.6V
Temperature compensation - 4 m V / c e l l * k
Max. solar panel current 5 / 8/ 10/ 15/ 20A (According to model number @50C)
Max. load current 5 / 8/ 10/ 15/ 20A (According to model number @50C)
Dimensions (W×H×D)8 0 × 1 0 0x 3 2 m m
Weight 180 gr
Max. Wire size 16 mm2(AWG #6)
Self-consumption < 4 m A 
Ambient temperature range -40 to +50C
Case protection IP 22
TECHNICAL  DATA